Close
عربة التسوق (0)
لا يوجد منتجات فى عربة التسوق
جميع الفئات
    Filters
    اللغة
    بحث

    Smoke Sensor

    1,798 ج م
    FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is programmable indicator of exceeding set temperature level. FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. Visual indicator signals fire, operating mode and is used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
    ihomefuture
    خطط الدفع الشهرية تبدأ من 149.83 ج.م. لمزيد من التفاصيل

    Features

    Features of Smoke Sensor in version 3.1 - 3.3
    • Compatible with any Z-Wave or Z-Wave+ Controller
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
    • Extremely easy installation – simply install it in location prone to fire
    • Battery powered
    • 3 levels of sensors sensitivity
    • Built-in casing opening detector
    • Alarm is signaled by sound, visual indicator and Z-Wave control command
    • Programmable excess temperature warning
    • Automatic test performed every 10 seconds

    Technical data

    Technical data for firmware 3.1 - 3.3
    Power supply:CR123A/CR17345 battery, 3.0V DC
    Operational temperature:0°C to 55°C
    Operational humidity:0% to 93%
    Measured temperature range:-20°C to 100°C
    Temperature measuring accuracy:0.5°C (within 0-55°C range)
    EU directives compliance:EN 14604:2005
    RED 2014/53/EU
    RoHS 2011/65/EU
    Radio protocol:Z-Wave
    Radio frequency:868.4 or 869.8 MHz EU;
    908.4 or 916 MHz US;
    921.4 or 919.8 MHz ANZ;
    869 MHz RU;
    Radio transmit power:up to -5 dBm (EIRP)
    Range:up to 50m outdoors
    up to 30m indoors
    (depending on terrain and building structure)
    Dimensions (diameter x height):65 x 28 mm
    مواصفات المنتج
    كتابة التقييم الخاص بك
    • يمكن للمستخدمين المسجلين فقط التقييم
    *
    *
    • سىء
    • ممتاز

    Features

    Features of Smoke Sensor in version 3.1 - 3.3
    • Compatible with any Z-Wave or Z-Wave+ Controller
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
    • Extremely easy installation – simply install it in location prone to fire
    • Battery powered
    • 3 levels of sensors sensitivity
    • Built-in casing opening detector
    • Alarm is signaled by sound, visual indicator and Z-Wave control command
    • Programmable excess temperature warning
    • Automatic test performed every 10 seconds

    Technical data

    Technical data for firmware 3.1 - 3.3
    Power supply:CR123A/CR17345 battery, 3.0V DC
    Operational temperature:0°C to 55°C
    Operational humidity:0% to 93%
    Measured temperature range:-20°C to 100°C
    Temperature measuring accuracy:0.5°C (within 0-55°C range)
    EU directives compliance:EN 14604:2005
    RED 2014/53/EU
    RoHS 2011/65/EU
    Radio protocol:Z-Wave
    Radio frequency:868.4 or 869.8 MHz EU;
    908.4 or 916 MHz US;
    921.4 or 919.8 MHz ANZ;
    869 MHz RU;
    Radio transmit power:up to -5 dBm (EIRP)
    Range:up to 50m outdoors
    up to 30m indoors
    (depending on terrain and building structure)
    Dimensions (diameter x height):65 x 28 mm
    مواصفات المنتج
    علامات المنتج