Close
عربة التسوق (0)
لا يوجد منتجات فى عربة التسوق
جميع الفئات
    Filters
    اللغة
    بحث

    Smart Implant

    ج م
    FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs.
    ihomefuture

    Features

    • Compatible with any certified Z-Wave or Z-Wave Plus controller.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater.
    • Allows for connecting sensors:
      • 6 DS18B20 sensors,
      • 1 DHT sensor,
      • 2 2-wire analog sensor,
      • 2 3-wire analog sensor,
      • 2 binary sensors.
    • Built-in temperature sensor.

    Technical data

    Power supply9-30V DC ±10%
    Inputs2 0-10V or digital inputs
    1 serial 1-wire input
    Outputs2 potential-free outputs
    Supported digital sensors6 DS18B20 or 1 DHT22
    Maximum current on outputs150mA
    Maximum voltage on outputs30V DC / 20V AC ±5%
    Built-in temperature sensor measurement range-55°C–126°C
    (-67°F–259°F)
    Operating temperature0–40°C (32–104°F)
    Radio protocolZ-Wave (500 series chip)
    Radio frequency868.4 or 869.8 MHz EU;
    908.4, 908.42 or 916.0 MHz US;
    921.4 or 919.8 MHz ANZ;
    869.0 MHz RU;
    Radio ransmit powermax. 7 dBm (EIRP)
    Rangeup to 50m (164 ft) outdoors
    up to 40m (131 ft) indoors
    (depending on terrain and building structure)
    Dimensions
    (Length x Width x Height)
    29 x 18 x 13 mm
    (1.14” x 0.71” x 0.51”)
    Compliance with EU directivesRoHS 2011/65/EU
    RED 2014/53/EU
    مواصفات المنتج
    كتابة التقييم الخاص بك
    • يمكن للمستخدمين المسجلين فقط التقييم
    *
    *
    • سىء
    • ممتاز

    Features

    • Compatible with any certified Z-Wave or Z-Wave Plus controller.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater.
    • Allows for connecting sensors:
      • 6 DS18B20 sensors,
      • 1 DHT sensor,
      • 2 2-wire analog sensor,
      • 2 3-wire analog sensor,
      • 2 binary sensors.
    • Built-in temperature sensor.

    Technical data

    Power supply9-30V DC ±10%
    Inputs2 0-10V or digital inputs
    1 serial 1-wire input
    Outputs2 potential-free outputs
    Supported digital sensors6 DS18B20 or 1 DHT22
    Maximum current on outputs150mA
    Maximum voltage on outputs30V DC / 20V AC ±5%
    Built-in temperature sensor measurement range-55°C–126°C
    (-67°F–259°F)
    Operating temperature0–40°C (32–104°F)
    Radio protocolZ-Wave (500 series chip)
    Radio frequency868.4 or 869.8 MHz EU;
    908.4, 908.42 or 916.0 MHz US;
    921.4 or 919.8 MHz ANZ;
    869.0 MHz RU;
    Radio ransmit powermax. 7 dBm (EIRP)
    Rangeup to 50m (164 ft) outdoors
    up to 40m (131 ft) indoors
    (depending on terrain and building structure)
    Dimensions
    (Length x Width x Height)
    29 x 18 x 13 mm
    (1.14” x 0.71” x 0.51”)
    Compliance with EU directivesRoHS 2011/65/EU
    RED 2014/53/EU
    مواصفات المنتج
    علامات المنتج