Close
عربة التسوق (0)
لا يوجد منتجات فى عربة التسوق
جميع الفئات
    Filters
    اللغة
    بحث

    Single Switch 2

    1,659 ج م
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality. FIBARO Switch 2 comes in two versions: Single Switch 2 (FGS-213) – can control one electric device
    ihomefuture
    خطط الدفع الشهرية تبدأ من 138.25 ج.م. لمزيد من التفاصيل

    Features

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
    • Advanced microprocessor control
    • Active power and energy metering functionality
    • Works with various types of switches – momentary, toggle
    • three-way, etc
    • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
    • FIBARO Switch 2 is an extension unit

    Technical data

    Power supply:100-240V~ 50/60 Hz
    Rated load current:Single Switch 2 (FGS-213):
    IEC standards: 8A
    UL standards (resistive load): 6.5A
    UL standards (incandescent load): 5A
    Double Switch 2 (FGS-223):

    IEC standards: 6.5A per channel, 10A overall
    UL standards (resistive loads): 6A per channel, 9.5A overall
    UL standards (incandescent loads): 3A per channel
    Operating temperature:0-35°C
    For installation in boxes:Ø ≥ 50mm, depth ≥ 60mm
    Radio protocol:Z-Wave (500 series chip)
    Radio signal power:up to 1mW
    Radio frequency:868.4 or 869.8 MHz EU;
    908.4, 908.42 or 916.0 MHz US;
    921.4 or 919.8 MHz ANZ;
    869.0 MHz RU;
    Radio transmit power:up to 6 dBm (EIRP)
    Range:up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure)
    Comply with EU directives:RED 2014/53/EU
    RoHS 2011/65/EU
    Dimensions (L x W x H):42.5 x 38.25 x 20.3 mm
    مواصفات المنتج
    اكتشف المزيد علىhttps://www.fibaro.com/en/products/switches/
    كتابة التقييم الخاص بك
    • يمكن للمستخدمين المسجلين فقط التقييم
    *
    *
    • سىء
    • ممتاز

    Features

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
    • Advanced microprocessor control
    • Active power and energy metering functionality
    • Works with various types of switches – momentary, toggle
    • three-way, etc
    • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
    • FIBARO Switch 2 is an extension unit

    Technical data

    Power supply:100-240V~ 50/60 Hz
    Rated load current:Single Switch 2 (FGS-213):
    IEC standards: 8A
    UL standards (resistive load): 6.5A
    UL standards (incandescent load): 5A
    Double Switch 2 (FGS-223):

    IEC standards: 6.5A per channel, 10A overall
    UL standards (resistive loads): 6A per channel, 9.5A overall
    UL standards (incandescent loads): 3A per channel
    Operating temperature:0-35°C
    For installation in boxes:Ø ≥ 50mm, depth ≥ 60mm
    Radio protocol:Z-Wave (500 series chip)
    Radio signal power:up to 1mW
    Radio frequency:868.4 or 869.8 MHz EU;
    908.4, 908.42 or 916.0 MHz US;
    921.4 or 919.8 MHz ANZ;
    869.0 MHz RU;
    Radio transmit power:up to 6 dBm (EIRP)
    Range:up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure)
    Comply with EU directives:RED 2014/53/EU
    RoHS 2011/65/EU
    Dimensions (L x W x H):42.5 x 38.25 x 20.3 mm
    مواصفات المنتج
    اكتشف المزيد علىhttps://www.fibaro.com/en/products/switches/
    علامات المنتج