Close
عربة التسوق (0)
لا يوجد منتجات فى عربة التسوق
جميع الفئات
    Filters
    اللغة
    بحث

    Roller Shutter 3

    1,659 ج م
    FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. Roller Shutter 3 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
    ihomefuture
    خطط الدفع الشهرية تبدأ من 138.25 ج.م. لمزيد من التفاصيل

    Main features

    • Compatible with any Z-Wave or Z-Wave+ Controller,
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
    • To be installed with roller blind motors with electronic or mechanical limit switches,
    • Advanced microprocessor control,
    • Active power and energy metering functionality,
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches,
    • To be installed in wall switch boxes.

    Technical data

    Power supply:100-240V~ 50/60 Hz
    Rated load current:4.2A for lamps and resistive loads
    1.7A for motors with compensated power factor (inductive loads)
    Supported motor type:single-phase AC motors
    Required limit switches:electronic and mechanic
    Power consumption:up to 0.8W
    Operating temperature:0-35°C
    Active element:micro-gap relay switch μ
    For installation in boxes:Ø ≥ 50mm, depth ≥ 60mm
    Radio protocol:Z-Wave (500 series chip)
    Radio signal power:EIRP up to 6dBm
    Radio frequency:868.4 or 869.8 Mhz EU
    908.4 or 916.0 Mhz US
    921.4 or 919.8 Mhz ANZ
    869.0 Mhz RU
    Range:up to 50 m outdoors
    up to 30 m indoors
    (depending on building materials)
    Dimensions: (L x W x H):42.50 x 38.25 x 20.30 mm
    Compliance with EU directives:RoHS 2011/65/EU
    RED 2014/53/EU

    مواصفات المنتج
    كتابة التقييم الخاص بك
    • يمكن للمستخدمين المسجلين فقط التقييم
    *
    *
    • سىء
    • ممتاز

    Main features

    • Compatible with any Z-Wave or Z-Wave+ Controller,
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
    • To be installed with roller blind motors with electronic or mechanical limit switches,
    • Advanced microprocessor control,
    • Active power and energy metering functionality,
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches,
    • To be installed in wall switch boxes.

    Technical data

    Power supply:100-240V~ 50/60 Hz
    Rated load current:4.2A for lamps and resistive loads
    1.7A for motors with compensated power factor (inductive loads)
    Supported motor type:single-phase AC motors
    Required limit switches:electronic and mechanic
    Power consumption:up to 0.8W
    Operating temperature:0-35°C
    Active element:micro-gap relay switch μ
    For installation in boxes:Ø ≥ 50mm, depth ≥ 60mm
    Radio protocol:Z-Wave (500 series chip)
    Radio signal power:EIRP up to 6dBm
    Radio frequency:868.4 or 869.8 Mhz EU
    908.4 or 916.0 Mhz US
    921.4 or 919.8 Mhz ANZ
    869.0 Mhz RU
    Range:up to 50 m outdoors
    up to 30 m indoors
    (depending on building materials)
    Dimensions: (L x W x H):42.50 x 38.25 x 20.30 mm
    Compliance with EU directives:RoHS 2011/65/EU
    RED 2014/53/EU

    مواصفات المنتج
    علامات المنتج