- Compatible with any Z-Wave Controller
- Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher)
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
- May be connected to any alarm system (potential free output terminal)
- Extremely easy installation – simply put on a surface prone to flooding
- May be installed anywhere – flood sensor’s contacts extended with a wire
- Battery or VDC powered. When connected to an external, 12/24V DC power source, the battery serves as an emergency power source
- Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller
- Two operating modes – flood/temperature sensor or just a temperature sensor.
- Alarm is signalled by sound, visual indicator (LED diode) and Z-Wave
https://youtu.be/EwxpFLp4x9o
Technical data
| Power supply: | Battery or 12–24V DC supply (LPS or NEC class 2) |
| Battery type: | CR123A/CR17345 battery, 3.0V DC |
| Power consumption (at VDC operation) | 0.4W |
Output terminals maximum current carrying capacity:
(ALARM NC, TAMP NC) | 25mA |
Maximum voltage at output terminals:
(SMOKE NC, TAMP NC) | 24V DC / 20V AC |
| EU standards compliance: | RED 2014/53/EU
RoHS 2011/65/EU |
| Radio protocol: | Z-Wave
Z-Wave+ (firmware 3.2 or higher) |
| Radio frequency: | 868.4 or 869.8 MHz EU;
908.4 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU; |
| Radio transmit power: | up to -5 dBm (EIRP) |
| Range: | up to 50 m outdoors
up to 30 m indoors
up to 40 m indoors (firmware 3.2 or higher)
(depending on terrain and building structure) |
| Operational temperature: | 0°C to 40°C – battery powering mode
-20°C to 70°C – VDC powering mode |
| Measured temperature range: | -20°C to 100°C |
| Temperature measuring accuracy: | 0.5°C (within 0 – 40°C range) |
Dimensions (diameter x height): | 72 x 28mm |
